Reduced price! View larger



New product

Product Summary

» Stock Location: (Out of stock)

» Pick-up: is not available

» Delivery: FREE delivery! Option to pay extra to choose fast courier at check out

» Brand: YALE

» Manuf. PN: 22120

» Actual Weight(estimate): 2.9

» Return Policy: This item is: "NON-RETURNABLE".

» Exceptions: Returns for DOA/Warranty defective as per our return policy.

» Warranty: Manufacturers warranty. Buy with confidence at our store, knowing that most of our products are sourced from local suppliers, are brand new, and come with Australian warranty.

More details

$76.58 tax incl.


$82.24 tax incl.

More info

Brand New Australia stock Yale Wireless PIR - MPN: 22120

Additional Information


  • Learn/Test Button
    • To enter Test mode: Press once in Standby mode.
  • The LED will light up for two seconds whenever a movement is detected. Test mode lasts for 3 minutes.
  • LED Indicator
  • Knockouts for Wall / Corner Mounting
  • Tamper Switch with spring
  • 3x 1.5V AAA Alkaline Battery
  • Top &, Bottom Cover securing screw hole


Sleep Timer
  • The PIR features an automatic &ldquo,sleep time" of approximately one minute for power conservation. After transmitting a detected movement, the PIR will not retransmit for one minute. Any further movement detected within this one-minute sleep period will extend the sleep time by another minute. Disable the sleep timer temporarily by entering the test mode. See Test Mode section.
LED indicator
  • Off: Normal operation
  • LED flash (2 sec) - Detects motion during Low battery, -Tamper activated or Test mode. -Spring tamper switch is activated.

Supervision Enable/Disable Jumper 2

  • If enabled, the PIR will automatically transmit Supervisory signals periodically to the Control Panel at random intervals. The Control Panel needs to enable supervision before it can monitor these periodic signals.
  • Jumper On = Supervision Disabled (Default)
  • Jumper Off = Supervision Enabled


  • Environmental conditions: -10c to 40c, relative humidity 85% non-condensing. Indoor use only
  • Radio: 433MHz FM

Movement High/Low Sensitivity Jumper 3

  • Jumper On = Increase PIR sensitivity to movement
  • Jumper Off = Decrease sensitivity (Factory Default)

Programming &, installation

  • Program your PIR before installation and test afterwards. Please see your current system instruction book.

Pack contents

  • 1 x PIR motion detector.
  • 4 x wall plugs &, screws.
  • 3 x 1.5V AAA alkaline cells (pre-fitted).

* If there is no enough information here for you to make a purchase decision, we suggest you to visit manufacturer's website for more details using their part number listed above. Alternatively, you can either call or email us to make an enquiry.